DataCard UltraGrafix Select Instrukcja Instalacji Pobierz pdf (Strona 253)

Maxsys and MX Series Software Administrator’s Guide 241

5. Cl

ick Save.

When the Card Setup is used to produce c

ards, the elements you selected for

quality checking will be examined.

Verify Laser Engraving Quality

Use this procedure to verify the quality of text or graphics printed with a Laser

Engraving module.

1. Op

en the ConCAD utility.

2. Cl

ick Open and then select the file to work with.

3. Se

lect a text or image element in the left pane.

4. On the Verification tab, select Verify element quality and select a Pass

Threshold value for the lowest quality that is acceptable.

Repeat steps 3 and 4 to check the quality of additional elements.

5. Click OK.

When the file is used to produce cards, the elements you selected for quality

checki

ng will be examined.

Font Creation Process

The Vision Verification module uses a tool from Cognex for Optical Character

Verification (OCV). The tool requires as a parameter the font name for the text

that is to be verified. If you do not know what the font name is and are not be able

to determine a reliable substitute, you can generate a True Type font from a

sample image to use as input for the OCV operation.

Tools and Requirements

• A good sample source representation of the font. You will need to capture a

quality image of the card side.

• A third-party tool

capable of generating a TrueType font. Datacard supplies

FontCreator Pro from High-Logic with the Vision Verification module for

creating TrueType fonts.

• A tool for capturing and creating individual bitmaps of each character in your

font that will be used for the OCV operation. Microsoft Paint is adequate for

this task.

• C

ognex license (included with the Vision Verification module).

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 321 322

Brak uwag

DataCard UltraGrafix Select Instrukcja Instalacji Strona 253