DataCard UltraGrafix Select Instrukcja Instalacji Pobierz pdf (Strona 123)

Maxsys and MX Series Software Administrator’s Guide 111

Emboss Element Properties

Use the following information to define the properties of an Emboss Element.

Emboss throughput is dependent upon module assignment per emboss

element. Emboss module throughput is dependant on the number, location,

font, and make-up of characters to be embossed. Multiple modules may be

used in a system to increase system throughput by dividing lines up among

modules. The slowest module will determine system throughput.

Advanced Tab Properties

Perform Operation

String

These three fields are related inasmuch as the program

performs the defined operation string using the selected Data

Field on the selected module.

For example: If there are four modules and each module has

a different foil type, and the operation string calls for the use

of foil type A (which is loaded on module 3), you should

select the options accordingly. Operation parameters are

defined in the Data Setup.

Perform Operation

Data Field

Perform Operation

on Module

Clear Perform

Operations Fields

Click Clear to remove all information from the Perform

Operations fields.

Preceding

Operations

Click Add/Modify to open the dialog from which you can

select the operation(s) to occur before this operation. Use the

arrows to move the operations from one column to the other.

Settings Tab Properties

Name The name of the Emboss Element

Side The side of the card (Front or Back) on which the operation is

to occur

X The horizontal coordinate at which the operation is to occur.

Click the icon to use Data Field information for the X

coordinate.

• For Maxsys – From 0.135 inch (3.43 mm) to 3.200 inches

(81.28 mm), measured from the left edge of card to the

center line of the character

• For MX Series – From 0.10 inch (2.54 mm) to 3.275 inches

(83.19 mm), measured from the left edge of card to the

center line of the character

Click the icon to select Data Field information for this

eration.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 321 322

Komentarze do niniejszej Instrukcji

Brak uwag

DataCard UltraGrafix Select Instrukcja Instalacji Strona 123

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Drukarki etykiet DataCard UltraGrafix Select