DataCard RL90 Podręcznik Użytkownika Pobierz pdf (Strona 41)

Cleaning the printer

RP90 and RL90 User Guide 35

Thermal head

The thermal head works should be

cleaned once every ten rolls of retransfer

film.

1 Slide the door latch to the right and

open the printer door.

2 Press the ink ribbon cartridge eject

button and remove the ink ribbon

cartridge.

3 Press the retransfer film cartridge

eject button and remove the

retransfer film cartridge.

4 Wipe the thermal head with a

cotton swab dipped in ethanol.

5 Reinstall the ink ribbon cartridge

and the retransfer film cartridge.

6 Close the printer door.

Printer fan filters

The printer is equipped with four fan filters to prevent airborne particles from

entering the print area. Clean the filters regularly and replace them when the

foam begins to deteriate.

1 Remove the printer's external fan filters; remove two filters from the left

side of the printer and one from the right side.

2 Remove the card hopper.

3 Remove the fan filter located on the upper surface of the card hopper

housing by sliding the filter to the left and pulling down.

4 Clean the filters carefully using a vacuum cleaner. Hold the foam filter

in place to prevent it from being drawn into the vacuum. Replace the

foam filters into their frames if they have been removed during

cleaning.

5 Reinstall the filters into the printer.

6 Replace the card hopper.

Tips – Thermal head

• Do not use metal or other

abrasive materials to

clean the thermal head.

• The thermal head can

break if touched with an

electrostatic charge.

Discharge youself by

touching the printer

frame before cleaning

the thermal head.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 74 75

Komentarze do niniejszej Instrukcji

Brak uwag

DataCard RL90 Podręcznik Użytkownika Strona 41

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia wielofunkcyjne DataCard RL90