DataCard RP90 Plus Instrukcja Instalacji Strona 5
- Strona / 48
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
2 Installing the Printer
Unpacking the RP90 Plus E Printer
Remove the RP90 Plus E card printer from the shipping carton. Remove all packing tape from
inside and around the printer. Remove the protective cushion that protects the printhead.
Unpacking the Optional RL90 Laminator
If this option is purchased, remove the optional RL90 Laminator from the shipping container.
Make sure to remove all packing tape inside and around the laminator. Remove the protective
cushion that protects both the heated roller and the platen roller.
Unpacking other options
The printer can have a smart card module installed in the field. For best results, set up the
printer and verify that it operates, and then install the optional smart card module.
Installing the Printer
Choosing a Location
The location of installation affects the performance of the RP90 Plus E and the optional RL90
Laminator. Install them in a location that meets the following criteria.
• Use the card printer in locations with the cleanness Class 8 or better of
ISO14611-1. Using the card printer in dusty locations may cause print blurring
and printhead malfunctions. Turn the power off whenever no printing
operation is required. Leaving power on for long periods without printing may
cause fine dust to collect inside the printer, causing print blurring and dust to
adhere to cards.
• Avoid locations susceptible to strong vibration or shock.
• Avoid locations exposed to direct sunlight.
• Avoid locations where there is a possibility of metal objects or other foreign
material entering the unit.
• Avoid areas near walls with little ventilation.
Caution: The RP90 Plus E Card Printer weighs approximately 49 pounds
(22kg). Use care when removing the printer from the shipping container.
Note: Save the shipping carton and packaging materials. They are required if
you need to store, move or return the printer for service. Replacements are not
available.
Caution: The RL90 Laminator weighs approximately 17 pounds (8kg). Use
care when removing the laminator from the shipping container.
Note: Save the shipping carton and packaging materials. They are required if
you need to return the laminator for service. Replacements are not available.
- Datacard 1
- RP90 Plus E Card Printer 1
- Liability Statement 2
- Proprietary Notice 2
- Trademark Acknowledgments 2
- Contents 3
- Preparing for Installation 4
- Installing the Printer 5
- Installing the Card Stacker 9
- Connecting the Power Cord(s) 10
- Connecting the Data Cable 11
- Installing the Printer Driver 12
- A Windows message appears 16
- About Network Installation 21
- Installing the Status Monitor 33
- Removing the Printer Driver 40
- Removing the Status Monitor 43
- Updating the Printer Driver 44
- Regulatory Compliance 46
- Safe Human Interface 47
- 11111 Bren Road West 48
- Minnetonka, MN 55343-9015 48
- 952.933.1223 48
- 952.933.7971 FAX 48
Powiązane produkty i podręczniki dla Laminatory DataCard RP90 Plus
Laminatory DataCard LM200 Podręcznik Użytkownika
(109 strony)
(109 strony)
Qsc-audio GP212-sw manuals
Owner’s manuals and user’s guides for Microphones Qsc-audio GP212-sw.
We providing 1 pdf manuals Qsc-audio GP212-sw for download free by document types: User Manual
Komentarze do niniejszej Instrukcji