DataCard LM200 Podręcznik Użytkownika Strona 8

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 109
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 7
2 SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide
About the printer
The Datacard® SR200 & SR300 card printers use retransfer printing technology to
produce high-quality, edge-to-edge printing on a variety of PVC and non-PVC card
surfaces, including contact and contactless smart cards. The retransfer printing process
uses two ribbon types – a color ink ribbon and a retransfer film. The ink ribbon is available
in YMCK (Yellow, Magenta, Cyan, and Black) or YMCKK format. The printer uses these
colors to print images on the retransfer film, and a heat roller to transfer the image onto a
card. An ink ribbon with a peel-off (PO) panel is available, to remove retransfer material in
areas of the card with a magnetic stripe, hologram, or smart card chip.The printer can also
use YMCK ribbon with a UV retransfer panel.
The SR200 printer can print on one side of a card and the SR300 printer can print on both
sides of the card. The SR300 printer can be equipped with optional magnetic stripe and
smart card capabilities.
The outside of the SR200 & SR300 printers
Printer LCD Panel Shows the printer status and any messages. Use it to view
printer settings. Use the driver Status Monitor to change most
printer settings.
Door Latch Slide the latch up to open the printer door.
Printer Door Open the door to access the ink ribbon and retransfer film
cartridges.
Power Switch Press the switch to power on the printer.
Card Hopper Load blank cards. Consists of hopper and hopper cover.
Card Reject Slot Cards for which the printer issued an error are ejected here.
Fan Filter and Cover Open to clean the fan filter and maintain card quality.
Port for Cable Lock Attach an optional cable lock in this location.
Lift Area Use this area to lift the printer when carrying.
Przeglądanie stron 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 108 109

Komentarze do niniejszej Instrukcji

Brak uwag