DataCard ImageCard Select Podręcznik Użytkownika Pobierz pdf (Strona 48)

4-4

Maintaining the printer

User’s Guide for Express™ and Select™ Class Printers

7 Replace the card cartridge. Push the bottom of the card cartridge until it clicks into

place.

The duplex module is clean and the printer is ready to resume normal operation.

♦

Using the magnetic stripe cleaning card

The printer’s magnetic stripe module should be cleaned when the printer has

displayed several magnetic stripe errors that list running the magnetic stripe cleaning

card as a solution. See “Supplies and cards” on page B-1 for information about

ordering magnetic stripe cleaning cards.

Do not use the magnetic stripe cleaning card more than once every 2000 cards or

excessive wear can result.

Run the magnetic stripe cleaning card

1 Insert a magnetic stripe cleaning card into the exception card slot. Make sure the

arrow is on top and pointing into the printer. (You can also remove the card

cartridge and place the cleaning card on the card input rollers.)

Figure 4-6: Insert the magnetic stripe cleaning card

Do not peel off the blue stripe on the back of the card.

2 Open the Status dialog box by double-clicking the icon.

3 Click the Clean Magnetic Stripe button.

The printer automatically runs the magnetic stripe cleaning process and ejects the

card in the output stacker when it is complete.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 109 110

Brak uwag

DataCard ImageCard Select Podręcznik Użytkownika Strona 48