DataCard ImageCard Select Podręcznik Użytkownika Strona 94
- Strona / 155
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
7-8 Install the printer
User’s Guide for Select™ Platinum Series™ Printers
Connect the power cord
1 Attach the power cord to the power receptacle on the back of the printer (step 1 in
Figure 7-7).
Figure 7-7: Connect the power cord
2 Plug the other end of the power cord into a single-phase, 3-wire grounded
receptacle with 90-130V AC or 195-254V AC at 50 or 60 Hz (step 2 in Figure 7-7).
The printer power supply automatically adjusts to the voltage of the input power.
3 Do not power on the printer until supplies are loaded.
♦
Preparing the printer for driver installation
After connecting the printer and PC and before installing the driver, do the following:
• Load cards in the card cartridge. See “Loading cards” on page 2-3.
• Install the continuous cleaning roller in the printer. See “Replacing the cleaning
roller sleeve” on page 4-3. There is no used sleeve to remove.
• Install the print ribbon. See “Loading the print ribbon” on page 2-5. When installing
a new printer, there is no used ribbon to remove.
• Power on the printer and PC. See “Powering on the printer and PC” on page 2-7.
Installing the printer driver
The Select printer includes a CD-ROM that contains the printer drivers for the
supported Windows operating systems. The supported operating systems are:
• Windows Millennium Edition (Me) (recommended)
• Windows XP with Service Pack 1 (recommended)
2
1
i
- User’s Guide for 1
- Select™ Printers 1
- Regulatory compliance 2
- Trademark acknowledgments 2
- Proprietary Notice 2
- Contents 3
- Overview 7
- About this manual 8
- Audience 8
- About the Select printer 8
- Printer models 9
- 1-4 Overview 10
- Printer features 11
- 1-6 Overview 12
- 1-8 Overview 14
- 1-10 Overview 16
- Using the printer 17
- Tips for success 18
- Loading cards 19
- 2-4 Using the printer 20
- Loading the print ribbon 21
- 2-6 Using the printer 22
- Load the print ribbon 22
- Power on the printer and PC 23
- Ready button 24
- Status light 25
- Making cards 26
- Removing cards 28
- Responding to messages 29
- 2-14 Using the printer 30
- Fix a printer problem 30
- Shut down the printer and PC 30
- 2-16 Using the printer 32
- Using the printer driver 33
- Document Properties 34
- Use the Properties dialog box 35
- 3-4 Using the printer driver 36
- 3-6 Using the printer driver 38
- • Print ribbon type 39
- • Print blocking pattern 39
- • Printer type 39
- 3-8 Using the printer driver 40
- Using the Printer Toolbox 42
- Open the Printer Toolbox 43
- 3-12 Using the printer driver 44
- Exiting the Printer Toolbox 45
- 3-14 Using the printer driver 46
- Maintaining the printer 47
- Running a cleaning cycle 48
- Replace the cleaning roller 49
- 4-4 Maintaining the printer 50
- Cleaning the printer rollers 52
- 4-8 Maintaining the printer 54
- Use the duplex cleaning card 55
- Cleaning tips 56
- Cleaning the printhead 57
- Edge of the printhead 58
- Ground cable 59
- 4-14 Maintaining the printer 60
- 4-16 Maintaining the printer 62
- Troubleshooting 63
- Troubleshooting guide 64
- 5-4 Troubleshooting 66
- Make a printer test card 66
- Printer test card 67
- Windows test page 68
- Magnetic stripe test card 69
- Problems with card appearance 70
- Print module 71
- 5-12 Troubleshooting 74
- 5-14 Troubleshooting 76
- Obtaining service 78
- 5-18 Troubleshooting 80
- Before you install 81
- Installation audience 82
- General requirements 82
- Selecting the site 83
- 6-4 Before you install 84
- 6-6 Before you install 86
- Install the printer 87
- Unpacking the printer 88
- Who to call for assistance 89
- Connecting cables 90
- Connect a USB data cable 91
- 7-6 Install the printer 92
- Installing the printer driver 94
- Installation choices 95
- 7-10 Install the printer 96
- 7-12 Install the printer 98
- 7-14 Install the printer 100
- 7-16 Install the printer 102
- 7-18 Install the printer 104
- Printing sample cards 105
- Setup tips 105
- Setting printer permissions 106
- Changing optional settings 106
- 7-22 Install the printer 108
- Safety and compliance 109
- Liability statement 110
- Acknowledgments 111
- Supplies and cards 113
- Personalization supplies 114
- Supply roll storage 115
- Card specifications 115
- Card quality guidelines 117
- Cleaning supplies 118
- Replaceable cleaning sleeve 119
- Cleaning kits (optional) 120
- Magnetic stripe cleaning card 120
- Duplex cleaning card 120
- Printer driver CD-ROM 121
- Path Purpose 122
- Printer components 123
- Print ribbon cartridge 124
- Card cartridge 124
- Cleaning roller spindle 124
- Data cable 124
- Power cable 125
- Related publications 126
- PC port settings 129
- Set up two ECP parallel ports 130
- Setting parallel port values 133
- Figure C-3: Ports dialog box 135
- Setting Value 135
- • Setting USB port values 137
- • Setting serial port values 137
- Magnetic stripe encoding 141
- Magnetic stripe escapes 143
- Using magnetic stripe escapes 144
- Printer 145
- Manufacturer 145
- Encoding 145
- Syntax Example 145
- TTS (Thrift Third Standard) 146
- NTT character set 147
Powiązane produkty i podręczniki dla Drukarki etykiet DataCard ImageCard Select
(322 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.041 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji